Alveolar Bone Research Articles

Radiographic evaluation of hard tissue changes in open flap technique versus flapless technique for implant placement

Open flap technique allows the clinician to directly visualize the alveolar bone and assess bone morphology of the ridge.However, this technique is relatively invasive and causes patient discomfort and marginal bone loss due to decreased supraperiosteal blood supply whereas the Flapless technique is one of the latest minimally invasive surgical methods of implant placement without the need to raise a mucoperiosteal flap to overcome the bone resorption process. The present study was designed to evaluate the hard tissue changes in open flap technique versus flapless ṭechnique for implant placement at the different time interval. Minimum thirty edentulous sites from Out Patient Department, Department of Periodontology (IDST) were randomly allocated to the following two groups by the flip of coin: Group I - Implant with open flap technique (fifteen sites) and Group II - Implant with flapless technique (fifteen sites). Patients were evaluated radiographically for crestal bone loss (mesial and distal) at Baseline (Immediately after implant placement), At the time of prosthetic loading and 3 months after prosthetic loading in both the groups. The result of the present study revealed that Sites where implants were placed with flapless technique showed lesser mean crestal bone loss scores as compared to sites where implants were placed with open flap technique, although the difference was insignificant. It can be concluded that flapless procedure may be considered as a better treatment option as compared to implant placed with open flap technique in terms of minimal pain, inflammation and less crestal bone loss associated with flapless technique than open flap technique.

Polarized M2 macrophages induced by glycosylated nano-hydroxyapatites activate bone regeneration in periodontitis therapy.

To investigate the association between periodontal macrophage polarization states and the alveolar bone levels, and to assess whether glycosylated nano-hydroxyapatites (GHANPs) could improve bone regeneration in periodontitis by inducing macrophage M2 polarization. The change of macrophage polarization state in inflammatory periodontal tissues (with bone loss) was examined using clinical gingival samples. The relationship between macrophage phenotype and bone level in periodontal bone loss and repair was evaluated using a mouse periodontitis model. The effect of GHANPs on macrophage polarization was assessed by the in vitro model of lipopolysaccharide (LPS)-stimulated inflammation. The polarization-related markers were detected by immunofluorescence staining, real-time polymerase chain reaction and enzyme-linked immunosorbent assay analysis. The therapeutic effect of GHANPs on alveolar bone loss was explored in experimental periodontitis by histological staining and micro-CT analysis. A lower macrophage M2/M1 ratio was observed in periodontitis-affected human gingival tissues. The results of animal experiments demonstrated a positive correlation between a lower Arg-1/iNOS ratio and accelerated alveolar bone loss; also, the proportion of Arg-1-positive macrophages increased during bone repair and regeneration. The administration of GHANPs partially restored M2 macrophage polarization after LPS stimulation. GHANPs increased alveolar bone repair and regeneration in experimental periodontitis induced by ligation, potentially related to their macrophage M2 transition regulation. The findings of this study indicate that the induction of macrophage M2 polarization can be considered a viable approach for enhancing inflammatory bone repair. Additionally, GHANPs show potential in the clinical treatment of periodontitis.

Effect of fence tray matching care on excess adhesive and bracket placement accuracy for orthodontic bonding: an in vitro study

ObjectiveThis study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and by comparing it with the half-wrapped tray (HWT).Materials and methodsAn intraoral scanner was used to acquire data on the maxillary dental arch of a patient with periodontitis.Furthermore, 20 maxillary dental arch models were 3D printed. Using 3Shape, PlastyCAD software, and 3D printing technology, 10 FTMC (method I) and HWT (method II) were obtained. By preoperative preparation, intraoperative coordination, and postoperative measurement, the brackets were transferred from the trays to the 3D-printed maxillary dental arch models. Additionally, the bracket’s excess adhesive as well as linear and angular deviations were measured, and the differences between the two methods were analyzed.ResultsExcess adhesive was observed in both methods, with FTMC showing less adhesive (P< 0.001), with a statistical difference. Furthermore, HWT’s vertical, tip and torque, which was significantly greater than FTMC (P< 0.05), with no statistical difference among other respects. The study data of incisors, canines, and premolars, showed that the premolars had more adhesive residue and were more likely to have linear and angular deviations.ConclusionsThe FTMC had higher bracket bonding effect in comparison to HWT, and the adhesive residue, linear and angular deviations are smaller. The fence tray offers an intuitive view of the precise bonding of the bracket, and can remove excess adhesive to prevent white spot lesions via care, providing a different bonding method for clinical applications.

A 3D In-vitro model of the human dentine interface shows long-range osteoinduction from the dentine surface

Emerging regenerative cell therapies for alveolar bone loss have begun to explore the use of cell laden hydrogels for minimally invasive surgery to treat small and spatially complex maxilla-oral defects. However, the oral cavity presents a unique and challenging environment for in vivo bone tissue engineering, exhibiting both hard and soft periodontal tissue as well as acting as key biocenosis for many distinct microbial communities that interact with both the external environment and internal body systems, which will impact on cell fate and subsequent treatment efficacy. Herein, we design and bioprint a facile 3D in vitro model of a human dentine interface to probe the effect of the dentine surface on human mesenchymal stem cells (hMSCs) encapsulated in a microporous hydrogel bioink. We demonstrate that the dentine substrate induces osteogenic differentiation of encapsulated hMSCs, and that both dentine and β-tricalcium phosphate substrates stimulate extracellular matrix production and maturation at the gel-media interface, which is distal to the gel-substrate interface. Our findings demonstrate the potential for long-range effects on stem cells by mineralized surfaces during bone tissue engineering and provide a framework for the rapid development of 3D dentine-bone interface models.

Long-term survival rates of tapered self-tapping bone-level implants after immediate placement: a positional effective rationale

BackgroundImmediate implant placement has gained popularity due to its several advantages. However, immediate placement has its challenges, including concerns about primary stability and bone formation around the implant. The aim of the present study is to evaluate the clinical outcomes of tapered, sand-blasted, and acid-etched internal submerged dental implants in various regions of the jaw bones and to provide a positional rationale for immediate implant placement.MethodsBetween 2009 and 2018, a single surgeon at Seoul National University Dental Hospital in Seoul, Korea, immediately inserted 49 dental implants with tapered bone-level design after extraction, in a total of 34 patients. The clinical outcomes were collected and evaluated, focusing on location of implant placement and marginal bone loss (MBL), with consideration of other parameters such as implant diameter and length.ResultsOf 49 immediately installed Luna® (Shinhung Co., Seoul, Korea) dental implants, 23 were placed in the mandible, and 26 were set in the maxilla. The mean age of patients at the time of installation was 65.91 years, ranging from 40 to 86 years. The average follow-up period was 7.43 years, with a range of 5 to 14 years. After a 5-year retrospective evaluation of tapered, sand-blasted, and acid-etched internal submerged dental implants for immediate implant placement, the cumulative survival rate was 93.88%, with 100% survival rate in the mandible and premolar region of both the maxilla and mandible.ConclusionsAfter a 5-year evaluation, tapered, sand-blasted, and acid-etched internal submerged dental implants demonstrated good efficacy for immediate placement in various locations within the dental arches, exhibiting effective clinical performance.

Orthodontic treatment outcome predictive performance differences between artificial intelligence and conventional methods

ABSTRACT Objectives To evaluate an artificial intelligence (AI) model in predicting soft tissue and alveolar bone changes following orthodontic treatment and compare the predictive performance of the AI model with conventional prediction models. Materials and Methods A total of 1774 lateral cephalograms of 887 adult patients who had undergone orthodontic treatment were collected. Patients who had orthognathic surgery were excluded. On each cephalogram, 78 landmarks were detected using PIPNet-based AI. Prediction models consisted of 132 predictor variables and 88 outcome variables. Predictor variables were demographics (age, sex), clinical (treatment time, premolar extraction), and Cartesian coordinates of the 64 anatomic landmarks. Outcome variables were Cartesian coordinates of the 22 soft tissue and 22 hard tissue landmarks after orthodontic treatment. The AI prediction model was based on the TabNet deep neural network. Two conventional statistical methods, multivariate multiple linear regression (MMLR) and partial least squares regression (PLSR), were each implemented for comparison. Prediction accuracy among the methods was compared. Results Overall, MMLR demonstrated the most accurate results, while AI was least accurate. AI showed superior predictions in only 5 of the 44 anatomic landmarks, all of which were soft tissue landmarks inferior to menton to the terminal point of the neck. Conclusions When predicting changes following orthodontic treatment, AI was not as effective as conventional statistical methods. However, AI had an outstanding advantage in predicting soft tissue landmarks with substantial variability. Overall, results may indicate the need for a hybrid prediction model that combines conventional and AI methods.

An Injectable Black Phosphorus Hydrogel for Rapid Tooth Extraction Socket Healing.

The excess production of reactive oxygen species (ROS) will delay tooth extraction socket (TES) healing. In this study, we developed an injectable thermosensitive hydrogel (NBP@BP@CS) used to treat TES healing. The hydrogel formulation incorporated black phosphorus (BP) nanoflakes, recognized for their accelerated alveolar bone regeneration and ROS-scavenging properties, and dl-3-n-butylphthalide (NBP), a vasodilator aimed at enhancing angiogenesis. In vivo investigations strongly demonstrated that NBP@BP@CS improved TES healing due to antioxidation and promotion of alveolar bone regeneration by BP nanoflakes. The sustained release of NBP from the hydrogel promoted neovascularization and vascular remodeling. Our results demonstrated that the designed thermosensitive hydrogel provided great opportunity not only for ROS elimination but also for the promotion of osteogenesis and angiogenesis, reflecting the "three birds with one stone" concept, and has tremendous potential for rapid TES healing.

Mitigating jaw osteonecrosis: bioactive glass and pericardial membrane combination in a rat model

ObjectivesBisphosphonates (BFs) show clinical effectiveness in managing osteoporosis and bone metastases but pose risks of bisphosphonate-related jaw osteonecrosis (BRONJ). With no established gold standard for BRONJ treatment, our focus is on symptom severity reduction. We aimed to assess the preventive effects of bioactive glass and/or pericardial membrane in a preclinical BRONJ model, evaluating their potential to prevent osteonecrosis and bone loss post-tooth extractions in zoledronic acid (ZA)-treated animals.MethodsRats, receiving ZA or saline biweekly for four weeks, underwent 1st and 2nd lower left molar extractions. Pericardial membrane alone or with F18 bioglass was applied post-extractions. Microarchitecture analysis and bone loss assessment utilized computerized microtomography (CT) and positron emission tomography (PET) with 18F-FDG and 18F-NaF tracers. Histological analysis evaluated bone injury.ResultsExclusive alveolar bone loss occurred post-extraction in the continuous ZA group, inducing osteonecrosis, osteolysis, osteomyelitis, and abscess formation. Concurrent pericardial membrane with F18 bioglass application prevented these outcomes. Baseline PET/CT scans showed no discernible uptake differences, but post-extraction 18F-FDG tracer imaging revealed heightened glucose metabolism at the extraction site in the ZA-treated group with membrane, contrasting the control group.ConclusionThese findings suggest pericardial membrane with F18 bioglass effectively prevents BRONJ in the preclinical model.

Associations between periodontitis and serum anti-malondialdehyde-acetaldehyde antibody concentrations in rheumatoid arthritis: A case-control study.

Malondialdehyde-acetaldehyde (MAA) adducts lead to generation of anti-MAA autoantibodies and have been independently identified in inflamed periodontal and rheumatoid arthritis (RA) tissues. This study evaluates serum samples from RA cases and osteoarthritis (OA) controls to quantify associations between periodontal clinical measures, alveolar bone loss (ABL), and anti-Porphyromonas gingivalis, anti-Prevotella intermedia, and anti-Fusobacterium nucleatum antibody concentrations with anti-MAA antibody concentrations. Participants (n=284 RA cases, n=330 OA controls) underwent periodontal clinical assessments and ABL measurements. Serum immunoglobulin (Ig) A, IgG, and IgM anti-MAA and serum IgG antibacterial antibody concentrations were quantified by enzyme-linked immunosorbent assay (ELISA). Analyses utilized simple linear regression and multivariable adjusted models. No significant associations of periodontal clinical measures with serum anti-MAA were found. Moderate (p=0.038 and p=0.036, respectively) and high ABL (p=0.012 and p=0.014, respectively) in RA cases (but not in OA) were positively associated with IgG and IgM anti-MAA. Anti-P. gingivalis and anti-P. intermedia antibody concentrations were positively associated with IgA (p=0.001 for both), IgG (p=0.007 and p=0.034, respectively), and IgM anti-MAA antibody concentrations (p<0.001 and p=0.020, respectively), while anti-F. nucleatum was positively associated with IgG anti-MAA (p=0.042), findings that were similar across groups. A positive association was demonstrated between ABL and serum IgG and IgM anti-MAA antibody concentrations that was unique to RA and not observed in OA. Serum anti-P. gingivalis, anti-P. intermedia, and anti-F. nucleatum antibody concentrations displayed significant associations with anti-MAA antibody in both groups. These findings suggest MAA may play a role in the interrelationship between the periodontium and RA.

Characterization and functional prediction of the dental plaque microbiome in patients with alveolar clefts

IntroductionAlveolar cleft (AC) is a common congenital defect in people with cleft lip and palate (CLP). Alveolar bone grafting (ABG) is typically performed during adolescence, resulting in the fissure remaining in the mouth for a longer length of time. Patients with AC have a greater rate of oral diseases such as dental caries than the normal population, and the precise characteristics of the bacterial alterations caused by AC are unknown.MethodsWe recruited a total of 87 subjects and collected dental plaque samples from AC adolescents (AAP), post-operative ABG adolescents (PAP), healthy control adolescents (CAP), AC young adults (AYP), post-operative ABG young adults (PYP), and healthy control young adults (CYP). The sequencing of 16S rRNA genes was performed.ResultsThe microbial composition of plaque from alveolar cleft patients differed significantly from age-matched healthy controls. Linear discriminant analysis effect size (LEfSe) analysis revealed that AAP was enriched for Neisseria, Haemophilus, Fusobacterium, Rhodococcus, Aggregatibacter, Gemella, and Porphyromonas, whereas AYP was enriched for Capnocytophaga, Rhodococcus, and Actinomyces-f0332. There were phenotypic differences in facultatively anaerobic, Gram-negative, Gram-positive, and oxidative stress tolerance between the AYP group with longer alveolar cleft and the healthy control group according to Bugbase phenotypic predictions. Alveolar bone grafting did not alter the functional phenotype of alveolar cleft patients but reduced the number of differential genera between alveolar cleft patients and healthy controls at both ages.ConclusionsOur study systematically characterized the supragingival plaque microbiota of alveolar cleft patients, post-alveolar bone grafting patients, and matched healthy controls in two ages to gain a better understanding of plaque ecology and microbiology associated with alveolar clefts.

Assessment of the Alignment Acceleration of the Lower Incisors Using a Single Aligner Appliance Modified with Nickel-Titanium Coils: A Randomized Controlled Clinical Trial in Adults.

OBJECTIVE: The aim of this study was to investigate the effects of a single aligner appliance modified with nickel-titanium coils in accelerating the alignment of crowded lower incisors. MATERIALS AND METHODS: 36 patients with mild crowding of their lower incisors were randomly divided into two groups: one group received a modified aligner appliance with nickel-titanium coils (Experimental group), while the other group received traditional orthodontic brackets (Control group). The degree of irregularity in the alignment of the incisors was measured every 2 weeks using Little's irregularity index, and this was done at different time points throughout the study: before treatment (T0), after 2 weeks (T1), after 4 weeks (T2), after 6 weeks (T3), after 8 weeks (T4). RESULTS: A total of 87 patients with anterior mild crowding in the lower dental arch were initially assessed for eligibility. Out of these, 64 patients met the inclusion criteria. Eventually, 36 participants were assigned to receive the treatment. Accordingly, the data from 36 patients were analyzed statistically. There was no significant difference when comparing the two groups at T0, T1, T3, and T4. However, the difference was significant at T2 (p = 0.037). The differences were statistically significant at all time periods within each group (P &lt; 0.001). CONCLUSION: The use of a modified aligner appliance with nickel-titanium coils effectively treats lower incisors crowding, but it does not accelerate the alignment process compared to the traditional fixed orthodontic appliance.

Injectable Thermosensitive Gel CH-BPNs-NBP for Effective Periodontitis Treatment through ROS-Scavenging and Jaw Vascular Unit Protection.

Periodontitis, a prevalent inflammatory condition in the oral cavity, is closely associated with oxidative stress-induced tissue damage mediated by excessive reactive oxygen species (ROS) production. The jaw vascular unit (JVU), encompassing both vascular and lymphatic vessels, plays a crucial role in maintaining tissue fluid homeostasis and contributes to the pathological process in inflammatory diseases of the jaw. In this study, we present a novel approach for treating periodontitis through the development of an injectable thermosensitive gel (CH-BPNs-NBP). The gel formulation incorporated black phosphorus nanosheets (BPNs), which are notable for their ROS-scavenging properties, and dl-3-n-butylphthalide (NBP), a vasodilator that promotes lymphatic vessel function within the JVU. Our results demonstrated that the designed thermosensitive gel served as a controlled release system, delivering BPNs and NBP to the site of inflammation. CH-BPNs-NBP not only protected macrophages and human lymphatic endothelial cells from ROS attack but also promoted M2 polarization and lymphatic function. In in vivo studies, we observed a significant reduction in inflammation and tissue damage, accompanied by a notable promotion of alveolar bone regeneration. This research introduces a promising therapeutic strategy for periodontitis, leveraging the unique properties of BPNs and NBP within an injectable thermosensitive gel. This article is protected by copyright. All rights reserved.

A preliminary in vivo and in vitro study of endothelial cell pyroptosis in the periodontal inflammatory environment

Objective: To observe whether endothelial cells undergo pyroptosis in the inflammatory periodontal environment by using a model in vivo and in vitro, providing an experimental basis for indepth understanding of the underlying pathogenesis of periodontitis. Methods: According to the classification of periodontal diseases of 2018, gingival tissues were collected from periodontally healthy subjects and patients with stage Ⅲ-Ⅳ, grade C periodontitis, who presented Department of Oral and Maxillofacial Surgery and Department of Periodontology, School of Stomatology, The Fourth Military Medical University from April to May 2022. Immunohistochemical staining was performed to detect the expression level and distribution of gasdermin D (GSDMD), a hallmark protein of cell pyroptosis, in gingival tissues. Periodontitis models were established in each group by ligating the maxillary second molar teeth of three mice for 2 weeks (ligation group). The alveolar bone resorption was determined by micro-CT (mice without ligation treatment were used as the control group), and the colocalization of GSDMD and CD31 were quantitatively analyzed by immunofluorescence staining in gingival tissues of healthy and inflammatory mice. Human umbilical vein endothelial cells (HUVECs) were cultured in vitro and treated with lipopolysaccharide (LPS) of Porphyromonas gingivalis (Pg) combined with adenosine triphosphate (ATP) at various concentrations of 0.5, 1.0, 2.5, 5.0, and 10.0 mg/L, respectively, and the 0 mg/L group was set as the control group at the same time. Scanning electron microscopy was used to observe the morphology of HUVECs. Western blotting was used to detect the expression of gasdermin D-N terminal domains (GSDMD-N) protein and immunofluorescence cell staining was used to detect the expression and distribution of GSDMD. Cell counting kit-8 (CCK-8) was used to detect the proliferative ability of HUVECs, and propidium iodide (PI) staining was used to detect the integrity of cell membrane of HUVECs. Results: Immunohistochemistry showed that GSDMD in gingival tissues of periodontitis was mainly distributed around blood vessels and its expression level was higher than that in healthy tissues. Micro-CT showed that alveolar bone resorption around the maxillary second molar significantly increased in ligation group mice compared with control subjects (t=8.88, P<0.001). Immunofluorescence staining showed significant colocalization of GSDMD with CD31 in the gingival vascular endothelial cells in mice of ligation group. The results of scanning electron microscopy showed that there were pores of different sizes, the typical morphology of pyroptosis, on HUVECs cell membranes in the inflammatory environment simulated by ATP combined with different concentrations of LPS, and 2.5 mg/L group showed the most dilated and fused pores on cell membranes, with the cells tended to lyse and die. Western blotting showed that the expression of GSDMD-N, the hallmark protein of cell pyroptosis, was significantly higher in 2.5 and 5.0 mg/L groups than that in the control group (F=3.86, P<0.01). Immunofluorescence cell staining showed that the average fluorescence intensity of GSDMD in 2.5 mg/L group elevated the most significantly in comparison with that in the control group (F=35.25, P<0.001). The CCK-8 proliferation assay showed that compared to the control group (1.00±0.02), 0.5 mg/L (0.52±0.07), 1.0 mg/L (0.57±0.10), 2.5 mg/L (0.58±0.04), 5.0 mg/L (0.55±0.04), 10.0 mg/L (0.61±0.03) groups inhibited cell proliferation (F=39.95, P<0.001). PI staining showed that the proportion of positive stained cells was highest [(56.07±3.22)%] in 2.5 mg/L group (F=88.24, P<0.001). Conclusions: Endothelial cells undergo significant pyroptosis in both in vivo and in vitro periodontal inflammatory environments, suggesting that endothelial cell pyroptosis may be an important pathogenic factor contributing to the pathogenesis of periodontitis.

Biofunctionalization of dental abutments by a zinc/chitosan/gelatin coating to optimize fibroblast behavior and antibacterial properties.

Tightly sealed peri-implant gingival tissue provides a barrier against oral bacterial invasion, protecting the alveolar bone and maintaining long-term implant survival. To investigate if zinc can enhance the integration between peri-implant gingival tissue and abutment surface, we herein present novel zinc/chitosan/gelatin (Zn/CS/Gel) coatings prepared using the electrophoretic deposition (EPD) technique. The effect of these coatings on human gingival fibroblasts (hGFs) was investigated by culturing these cells on top of the EPD coatings. Surface characterization demonstrated that Zn2+ were released in a sustained and pH-responsive manner. The preclinical cell culture evaluation of these coatings indicated that the zinc-containing coatings enhanced cell migration, adhesion and collagen secretion of hGFs. Moreover, the zinc-containing coatings exhibited antibacterial efficacy by inhibiting the growth of Porphyromonas gingivalis and reducing attachment of Staphylococcus aureus. Notably, zinc-free CS/Gel coatings prevented attachment of P. gingivalis as well. The coatings were also shown to be cytocompatible with epithelial cells and osteoblasts, which are other relevant cell types which surround dental implants after clinical placement. Based on our findings, it can be concluded that Zn-containing coatings hold promise to enhance the adhesion of gingival tissue to the implant surface, which may potentially contribute to the formation of a robust peri-implant soft sealing counteracting bacterial invasion.

Transplanted MSCs promote alveolar bone repair via hypoxia-induced extracellular vesicle secretion.

Mesenchymal stem cell (MSC) therapy is a potential strategy for promoting alveolar bone regeneration. This study evaluated the effects and mechanisms of transplanted MSCs on alveolar bone repair. Mouse alveolar bone defect model was treated using mouse bone marrow mesenchymal stem cell (BMSC) transplantation. The bone repair was evaluated by micro-CT and Masson staining. The conditioned medium of hypoxia-treated BMSCs was co-cultured with normal BMSCs invitro to detect the regulatory effect of transplanted MSCs on the chemotactic and migratory functions of host cells. The mechanisms were investigated using Becn siRNA transfection and western blotting. BMSC transplantation promoted bone defect regeneration. The hypoxic microenvironment induces BMSCs to release multiple extracellular vesicle (EV)-mediated regulatory proteins that promote the migration of host stem cells. Protein array analysis, western blotting, GFP-LC3 detection, and Becn siRNA transfection confirmed that autophagy activation in BMSCs plays a key role during this process. The local hypoxic microenvironment induces transplanted MSCs to secrete a large number of EV-mediated regulatory proteins, thereby upregulating the migration function of the host stem cells and promoting alveolar bone defect regeneration. This process depends on the autophagy-related mechanism of the transplanted MSCs.

Prevalence of the Gingival Phenotype in Adults and Associated Risk Factors: A Systematic Review of the Literature

The relevance of assessing the gingival phenotype prior to the initiation of periodontal, orthodontic, or prosthetic therapy has been clearly demonstrated. However, publications on this subject are either old or concerned with the means of assessing the gingival phenotype or the main factors likely to modify it. The main objective of this systematic review of the literature was therefore to investigate the prevalence of different gingival phenotypes in adults in good general health and with a healthy periodontium. A systematic review of the literature was performed following the guidelines of PRISMA recommendations using an electronic search strategy on four databases (PubMed, Scopus, Cochrane Library, and Embase) complemented by a manual search. Three independent authors were involved in study selection, data extraction, and bias assessment. Results: Of 807 articles, 17 of them, published between 2012 and 2023, involving 3277 subjects from 11 countries and 9766 dental sites, fulfilled the inclusion criteria. The prevalence of the gingival phenotype could not be determined at the level of an individual or a dental arch because all the publications assessed this phenotype only at the level of certain dental sectors, and were not chosen at random. The maxillary central incisors and maxillary or mandibular first molar sectors were associated with a high and thick gingival phenotype, independently of the dental morphology, gender, and age of adult subjects. Furthermore, in these regions, this gingival phenotype tended to be associated with a thick vestibular bone table. In contrast, maxillary and mandibular incisors and premolars more often had a thin gingival phenotype. For other teeth, the results were less conclusive. It is important not to rely solely on the overall appearance of the dentition but to independently assess the thickness and height of the gingiva at each dental site requiring intervention. Finally, this study highlights a key point, namely the need for further longitudinal studies to determine the prevalence in healthy adults. For practicality and feasibility reasons, these studies should be designed according to therapeutic needs, dental sector by dental sector, and within homogeneous source populations. PROSPERO registration: CRD 42023392602.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

Nutrigenomics As a Diagnostic Tool in Periodontology: The New Kid in The Block

Periodontitis is known to be a progressive inflammatory lesion that may lead to the deterioration of the attachment of the periodontal apparatus &amp; loss of structures involved in the apparatus, mainly the gingiva, pdl, cementum &amp; alveolar bone leading to loss of teeth. Therefore, the interest in learning more about the connections between periodontal disease and nutrition has increased as research on the pathophysiology of periodontal disease and the function of nutrition has progressed. A subfield of nutritional science called nutrigenomics focuses on understanding the molecular interactions of nutrients and genomes. This enables us to recognize early-stage abnormalities in this control and tells us of the impact of nutrition on metabolic pathways &amp; homeostatic regulation. In this review, the role of nutrition in periodontal disease is thoroughly discussed, and dietary recommendations are made for preventing periodontal disease.

RNA Technology to Regenerate and Repair Alveolar Bone Defects.

microRNA-200a (miR-200a) targets multiple signaling pathways that are involved in osteogenic differentiation and bone development. However, its therapeutic function in osteogenesis and bone regeneration remains unknown. In this study, we use in vitro and in vivo models to investigate the molecular function of miR-200a overexpression and miR-200a inhibition using a plasmid-based miR inhibitor system (PMIS) on osteogenic differentiation and bone regeneration. Inhibition of miR-200a using PMIS-miR-200a significantly increased osteogenic biomarkers of human embryonic palatal mesenchyme cells and promoted bone regeneration in rat tooth socket defects. In rat maxillary M1 molar extractions, the supporting tooth structures were removed with an implant drill to yield a 3-mm defect in the alveolar bone. A collagen sponge was inserted into the open alveolar defect and PMIS-miR-200a plasmid DNA was added to the sponge and the wound sutured to protect the sponge and close the defect. It was important to remove the existing tooth supporting structure, which can influence alveolar bone regeneration. The alveolar bone was regenerated in 4 wk. The collagen sponge acts to stabilize and deliver the PMIS-miR-200a DNA to cells entering the sponge in the bone defect. We show that mesenchymal stem cells expressing CD90 and Stro-1 enter the sponges, take up the DNA, and express PMIS-miR-200a. PMIS-miR-200a initiates a bone regeneration program in transformed cells in vivo. In vitro inhibition of miR-200a was found to upregulate Wnt and BMP signaling activity as well as Runx2, OCN, Lef-1, Msx2, and Dlx5 associated with osteogenesis. Liver and blood toxicity testing of PMIS-miR-200a-treated rats showed no increase in several biomarkers of liver disease. These results demonstrate the therapeutic function of PMIS-miR-200a for rapid bone regeneration. Furthermore, the studies were designed to demonstrate the ease of use of PMIS-miR-200a in solution and applied using a syringe in the clinic through a simple one-time application.

Change in Dental Arch Parameters—Perimeter, Width and Length after Treatment with a Printed RME Appliance

One of the important parameters in orthodontics is the perimeter of the dental arch. Precise assessment is necessary in cases of maxillary constriction treated with a rapid maxillary expander (RME). The orthodontic software allows customization of the processes from diagnosis to manufacturing of the treatment device. The aim of the present study is to evaluate a relationship between the parameters of the dental arch—perimeter, width, and length—and to follow the changes during treatment. The study is based on the digital measurements of 3D models of 33 patients treated with a digitally planned and printed RME. In the results an increase of 3.99 mm in perimeter was achieved. The rest of the parameters were changed as follows: The width of the dental arch was increased in the premolar area by an average of 3.3 mm; in the area of the first molars, the increase was 4.41 mm; the length of the dental arch in the anterior segment was reduced by an average of 0.54 mm; and the whole length by 0.52 mm. Correlation between the studied variables was described by linear equations. In conclusion, rapid maxillary expansion is a reliable method for gaining predictable space in the dental arch.